TG-DSC analysis of pyrolysis process of two Chinese oil shales.

According to the recommendations developed by the Kinetics Committee of the International Confederation for Thermal Analysis and Calorimetry (ICTAC), non-isothermal pyrolysis experiments were carried out to analyze and compare two types of oil shale from the northeast of China using simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis at temperatures ranging from 40 to 850 °C. The pyrolysis process of oil shale begins with the evaporation of small molecular substances, then continues by the pyrolysis of kerogen, and finally ends mainly with the complete decomposition of carbonates. In this whole process, almost 36 % of overall pyrolytic heat was used for the pyrolysis of kerogen. When retorting air-dried basis oil shale below 520 °C, a considerable proportion of the heat required will have to be used mainly for the evaporation of small molecular substances below 185 °C. Specific heat capacities of two oil shale semicokes were measured below 500 °C by DSC method, showing that specific heat capacity of semicoke will increase with the increase of the temperature, and carbonization of kerogen can bring about a further positive effect on it. Coats-Redfern method was used to calculate kinetic parameters in three pyrolysis stages. [ABSTRACT FROM AUTHOR]