Three dimensional thermal Lattice Boltzmann simulation of heating/cooling spheres falling in a Newtonian liquid.

Abstract: This paper presents a numerical study of heat transfer from spheres settling under gravity in a box filled with liquid. Three-dimensional Lattice Boltzmann Method is applied to simulate fluid-particle interaction. Firstly the developed numerical model is validated in comparison with experimental and numerical data for a falling sphere in a box filled with liquid. Then the effects of Reynolds, Prandtl and Grashof numbers (Re, Pr, Gr) are investigated for a settling particle at fixed/varied temperature. The time variations of velocity, height and Nusselt number of the settling particle are also investigated. The results depict that the maximum settling velocity of the particle at varied surface temperature is higher at lower Reynolds numbers. As the Reynolds number increases, the settling velocity of the particle for both cases of constant and varied temperature is the same. However, the Nusselt number of the particle at varied temperature is lower compared with that for the particle at constant surface temperature. Increasing the Grashof number leads to slower settling and larger average Nusselt number. Finally sedimentation of 30 hot spherical particles in an enclosure and their hydraulic and heat transfer interactions with the surrounding fluid are studied. The results depict how the presence of heat transfer phenomena can significantly alter the behavior of settling particles. [Copyright &y& Elsevier]