Morphology, mechanical properties, and shape memory effects of poly(lactic acid)/ thermoplastic polyurethane blend scaffolds prepared by thermally induced phase separation.

Novel blended scaffolds combining biobased polylactic acid (PLA) and thermoplastic polyurethane (TPU) were fabricated by thermally induced phase separation (TIPS) using two different solvents. Pure PLA and TPU polymer scaffolds using 1,4-dioxane as the sole solvent exhibited typical ladder-like structures, while blended PLA/TPU scaffolds using the same solvent showed a more uniform microstructure. When de-ionized water was added to the solution as a non-solvent, scaffolds with the mixed solvent showed more open cells and greater interconnectivity. In compression tests, it was found that specimens, including pure PLA, TPU, and blended scaffolds with the mixed solvent, showed a higher compressive modulus than their counterparts that used dioxane as the single solvent. Dynamic mechanical analysis (DMA) was employed to characterize the shape memory properties of the scaffolds. DMA indicated that the shape fixing ratio was highest in the PLA scaffolds, while the shape recovery ratio of the TPU scaffolds was the greatest among the specimens. More interestingly, when the mixed solvent was used, the shape memory property of the blended scaffolds displayed a similar deformation curve to the TPU scaffold. This was due to the presence of the TPU phase and similarity in structure between PLA/TPU and TPU scaffolds when mixed solvent was used. In the degradation test, the blended scaffolds showed a balanced degradation behavior in-between the more easily degraded PLA and the more stable TPU in the phosphate-buffered saline (PBS), and the addition of water to the systems accelerated the degradation process of the specimens. Cell culture results showed that all of the scaffolds had good biocompatibility. [ABSTRACT FROM PUBLISHER]