Back to Search
Start Over
Effect of grain orientation and heat treatment on mechanical properties of pure W.
- Source :
-
Journal of Nuclear Materials . Dec2014, Vol. 455 Issue 1-3, p475-479. 5p. - Publication Year :
- 2014
-
Abstract
- The effect of grain orientation, heat-treatment temperature and test temperature on the mechanical properties of tungsten (W), which vary depending on plastic working and fabrication process, was investigated by mechanical testing of tensile or bending. Heavily worked W samples (1.5–2.0 mm in the final thickness) exhibit degradation of fracture strength due to recrystallization embrittlement after heat-treatment at 1240 °C (temperature of diffusion bonding between W and a candidate material of the Fe base support structure). On the other hand, W samples with lower thickness reduction rates do not suffer degradation of fracture strength after heating up to around 1300 °C, and show somewhat higher fracture strength by heat-treatment below 1300 °C than the samples in the as-received state. The observed behavior is a reflection of recovery of dislocations introduced by plastic working. High temperature tensile testing of ITER grade W with an anisotropic grain structure and S-TUN with an equiaxed grain structure revealed that both W grades exhibit plastic elongation at temperatures higher than 200 °C with essentially the same temperature dependence of yield strength, which is relatively insensitive to grain orientation in the structure at 200–1300 °C. [ABSTRACT FROM AUTHOR]
Details
- Language :
- English
- ISSN :
- 00223115
- Volume :
- 455
- Issue :
- 1-3
- Database :
- Academic Search Index
- Journal :
- Journal of Nuclear Materials
- Publication Type :
- Academic Journal
- Accession number :
- 99790825
- Full Text :
- https://doi.org/10.1016/j.jnucmat.2014.07.034