Formability in synchronous multipass spinning using simple pass set.

This study is an investigation into the effect of the different parameters of the pass set on the formability in synchronous multipass spinning. Synchronous multipass spinning is a metal spinning method that can produce a noncircular cylindrical shape with a noncircular bottom and vertical walls from a metal sheet. The radial position of the roller tool is synchronized with the spindle rotation while the work piece is formed from a flat disk into the shape of the mandrel step by step along varying trajectories. The tool trajectory is calculated by linear interpolation between the mandrel shape and the blank disk shape along a pass set. Here, a pass is the tool trajectory in the normalized two-dimensional space defined by the radial and axial directions of the mandrel. The aim of this study is to examine the effect of different parameters of the pass set on the formability of two sample shapes, a circular cup and a rectangular box. The formability was experimentally examined using a rotational pass set and a translational pass set as simple tool trajectories. The rotational pass set consists of curved passes with the same start point and a constantly increasing angle inclination. The translational pass set consists of passes with the same inclination and a start point that is moved by a constant amount. The angle of growth of the rotational pass set, the incremental movement of the translational pass set, and the nominal product height are varied for comparison in the experiments. [ABSTRACT FROM AUTHOR]