Short-term number of pecks and feed intake levels: a link with the physical characteristics of feed in four-week-old turkeys.

Short-term reactions of young turkeys to changes in the physical characteristics of their feed sometimes give rise to problems of adaptation in the field. Specific feeders were designed for this study to automatically count the number of pecks given at feed by 4-wk-old male turkeys during 95-min sessions. The lighting program was intermittent (0140L:0100D). In experiment 1, 4 series of 12 birds were tested 4 times/day from 28 to 31 d of age. Four control turkeys were consistently tested with 1 feed, and 8 experimental turkeys ate 1 of 32 commercial feeds (30 as pellets and 2 as crumbs) with a distinct feed for each test (16 replicates/experimental feed). Feed intake, total number of pecks, and pecking efficiency (mg/peck) were recorded for each test and normalized for each turkey. The effects of series, day, and test were not significant for controls. The number of pecks and pecking efficiency differed among feeds (P < 0.001) but not feed intake. Hierarchical Cluster Analysis for these variables distinguished 3 groups of feed: group 3 (6 crumb and small pellets) resulted in high pecking and low efficiency. However, group 1 (10 feeds) were pecked at less but more efficiently than group 2 (16 feeds) for similar feed intake, although the average sizes of the pellets were similar (6.23 and 6.16 mm, respectively), as were the average bulk density, hardness, resistance to abrasion, and color characteristics of the pellets for both groups. Two feeds of each of these 2 groups were compared in a second experiment for 12 turkeys receiving the 4 feeds successively each day over 4 d in varying order. The turkeys consistently pecked the feeds of group 1 less and less efficiently compared with group 2. The automated measurement of pecking, combined with a more detailed image analysis of feed particles, might enhance the evaluation of the effects of feed technology on the behavior of turkeys and thus become a useful tool for the feed industry.