Spectroscopic evaluation of the environmental impact on black crusted modern mortars in urban-industrial areas.

A multianalytical characterisation of black crusted modern construction materials from buildings located in the Bilbao Metropolitan area (North Spain) was carried out. According to the mineral composition determined by Raman spectroscopy, calcite and hematite were the major compounds found while aragonite, limonite, rutile, quartz and some aluminosilicates such as obsidian or amazonite (KAlSi(3)O(8)) were also present in minor percentages. As deterioration products, gypsum and anhydrite were widely found not only in the surface but also in the inner part of strongly deteriorated samples. Coquimbite (Fe(2)(SO(4))(3)·9H(2)O) was identified as well in the most protected facade where high amounts of Fe, having probably an anthropogenic origin, were measured by micro X-ray fluorescence (μ-XRF). Zn was found to be in high amounts while Cu, Pb, Ti, Mn, Sr and K were identified as minor elements. Considering the non-expected concentrations found for some anthropogenic elements, a sequential extraction was carried out in order to determine their chemical form by means of ion chromatography and inductively coupled plasma mass spectrometry. The orientation of the facades, which had a different influence from rain washing and industrial and traffic impact, was shown to affect the accumulation of different compounds in the black crust. Finally, the MEDUSA software was used to simulate the reactions among the original compounds, deposited pollutants and the atmospheric acid gases in order to explain the presence of the decaying species found.