Design and fabrication of a downlight luminaire with a dual frusto-conical reflector.

A design method and corresponding fabrication procedures are proposed for a dual frusto-conical reflector of a downlight luminaire. The profile of the dual frusto-conical reflector consists of two flat-slant reflective surfaces with slightly different slopes. The optimum dual frusto-conical reflector can be obtained with the proposed design method. The finished product of the dual frusto-conical reflector is fabricated by a 3D printer and followed by surface polishing and reflection paint spraying. The measurement results show that luminaires exhibited 70% optimum illuminance confined within an illumination area of 1.8 m ² , and the optimum illumination intensity is at 252 lux. The optimum efficiency of the proposed luminaire can reach 158 lm/W for normal-white light-emitting diode (LED) and 119 lm/W for warm-white LED, respectively.