Review of inventory data for the thermal treatment of sewage sludge.

The thermal treatment of sewage sludge has gained much interest in recent years, as exemplified by the 269 papers found in the scientific literature for the period 2010-2021. We identified 140 datasets in 57 papers presenting inventory data related to mass flows, energy and emissions for the incineration, gasification and pyrolysis of sewage sludge. Sewage sludge incineration (excess oxygen, 850-950 ℃) is an established technology; however, data on flue gas cleaning and air emissions are scarce. The recovery of energy is close to the amount of energy used for incinerating dried sludge (0.2 kWh/kg TS), while dewatered sludge incineration uses more energy (1-2 kWh/kg TS) than what can be recovered. Sewage sludge gasification (limited oxygen, 650-950 ℃) is an experimental technology with four outputs (kg/kg sludge TS): char 0.43, tar 0.02, fly ash 0.06 and syngas 0.53. The data vary significantly in this regard, suggesting than many factors affect the performance of the gasification process. Sewage sludge pyrolysis (no oxygen, 400-800 ℃) is an experimental technology with five outputs (kg/kg sludge TS): char 0.53, tar 0.21, water < 0.05, fly ash set to zero and syngas 0.21. The values are somewhat different for digested sludge. Energy consumption for the pyrolysis of sewage sludge cannot be estimated from the literature. The current literature provides useful data on the main flows of thermal technologies, although large variations are in evidence. However, data are limited on energy consumption and recovery in general, and they are scarce on direct emissions to the air from incineration.
(Copyright © 2022 Elsevier Ltd. All rights reserved.)