Preparation and characterization of a novel hydrophilic PVDF/PVA UF membrane modified by carboxylated multiwalled carbon nanotubes.

Polyvinylidene fluoride (PVDF)/polyvinyl alcohol (PVA) ultrafiltration (UF) membranes were prepared via a phase inversion method employing the modification of carboxylated multiwalled carbon nanotubes (MWCNTs-COOH). Various contents of MWCNTs-COOHs (0.00-0.15 wt%, weight of casting solution) were added into PVDF/PVA/dimethyl sulfoxide systems for the fabrication of the plate UF membrane. Fourier transform infrared spectroscopy spectra identified the successful introduction of carboxyl through the CO peak at 1730 cm⁻¹. Scanning electron microscopy images exhibited the external surface and the asymmetric morphology with the appearance of a sponge-like inner structure. Atomic force microscopy analysis determined the roughness values and rougher topography. The hydrophilicity of the composite membrane containing 0.09 wt% of MWCNTs-COOHs improved the most. This sample has the highest pure water flux, approximately doubled (126.6 L·m⁻²·h⁻¹) compared to the PVDF/PVA membrane (68.6 L·m⁻²·h⁻¹), an enhanced bovine serum albumin flux recovery rate, showing an increase of 17%, and the best fouling resistance ability. Meanwhile, the porosity and dynamic contactangle also indicate the enhancement of membrane hydrophilicity. Dextran (DEX) 600k rejection reached 91.0%. Break strength, elongation at break, and Young's modulus also had improvements of 60%, 215.5%, and 56.7%, respectively, when the MWCNTs-COOH content was 0.12 wt%. POLYM. ENG. SCI., 56:955-967, 2016. © 2016 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]