Back to Search Start Over

Influence of fuel ethanol content on primary emissions and secondary aerosol formation potential for a modern flex-fuel gasoline vehicle.

Authors :
Timonen, Hilkka
Karjalainen, Panu
Saukko, Erkka
Saarikoski, Sanna
Aakko-Saksa, Päivi
Simonen, Pauli
Murtonen, Timo
Dal Maso, Miikka
Kuuluvainen, Heino
Bloss, Matthew
Ahlberg, Erik
Svenningsson, Birgitta
Pagels, Joakim
Brune, William H.
Keskinen, Jorma
Worsnop, Douglas R.
Hillamo, Risto
Rönkkö, Topi
Source :
Atmospheric Chemistry & Physics; 2017, Vol. 17 Issue 8, p5311-5329, 19p, 4 Charts, 9 Graphs
Publication Year :
2017

Abstract

The effect of fuel ethanol content (10, 85 and 100 %) on primary emissions and on subsequent secondary aerosol formation was investigated for a Euro 5 flex-fuel gasoline vehicle. Emissions were characterized during a New European Driving Cycle (NEDC) using a comprehensive setup of high time-resolution instruments. A detailed chemical composition of the exhaust particulate matter (PM) was studied using a soot particle aerosol mass spectrometer (SPAMS), and secondary aerosol formation was studied using a potential aerosol mass (PAM) chamber. For the primary gaseous compounds, an increase in total hydrocarbon emissions and a decrease in aromatic BTEX (benzene, toluene, ethylbenzene and xylenes) compounds was observed when the amount of ethanol in the fuel increased. In regard to particles, the largest primary particulate matter concentrations and potential for secondary particle formation was measured for the E10 fuel (10% ethanol). As the ethanol content of the fuel increased, a significant decrease in the average primary particulate matter concentrations over the NEDC was found. The PM emissions were 0.45, 0.25 and 0.15 mg m<superscript>-3</superscript> for E10, E85 and E100, respectively. Similarly, a clear decrease in secondary aerosol formation potential was observed with a larger contribution of ethanol in the fuel. The secondary-toprimary PM ratios were 13.4 and 1.5 for E10 and E85, respectively. For E100, a slight decrease in PM mass was observed after the PAM chamber, indicating that the PM produced by secondary aerosol formation was less than the PM lost through wall losses or the degradation of the primary organic aerosol (POA) in the chamber. For all fuel blends, the formed secondary aerosol consisted mostly of organic compounds. For E10, the contribution of organic compounds containing oxygen increased from 35 %, measured for primary organics, to 62% after the PAM chamber. For E85, the contribution of organic compounds containing oxygen increased from 42% (primary) to 57% (after the PAM chamber), whereas for E100 the amount of oxidized organics remained the same (approximately 62 %) with the PAM chamber when compared to the primary emissions. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
16807316
Volume :
17
Issue :
8
Database :
Complementary Index
Journal :
Atmospheric Chemistry & Physics
Publication Type :
Academic Journal
Accession number :
122861718
Full Text :
https://doi.org/10.5194/acp-17-5311-2017