Plasma Exposure Behavior of Yttrium Oxide Film Formed by Aerosol Deposition Method.

Aerosol deposition (AD) method is technique for forming high density ceramic films on substrate material surface at room temperature. The yttrium oxide films formed by the AD method (AD-Y2O3 films) have been developed as plasma resistance coating used for the plasma etching equipment. In recent years, plasma eroded particles from chamber components of the etching devices are regarded as a serious issue that they reduce the semiconductor device yield rate. AD-Y2O3 films which have excellent plasma resistance can reduce the eroded particles in the plasma etching equipment and greatly have contributed to manufacturing high integrated semiconductor devices. In this paper, the plasma erosion behavior of AD-Y2O3 films were investigated compared with sintered Al2O3, sintered Y2O3 and thermal splayed Y2O3 in order to clarify the reason why AD Y2O3 films were superior as plasma resistance material. The plasma etching rates of AD-Y2O3 films were not significantly different from other samples. It was assumed that the etching rates were dependent on the chemical stability to fluorine plasma of material. On the other hand, the surface roughness difference before and after plasma exposure of AD-Y2O3 films were much smaller than other samples. It was assumed that the surface roughness difference is dependent on the crystalline size of material. The structure of AD-Y2O3 films, which had high density and nano-crystalline structure, were eroded homogeneously and smoothly. It suggests AD-Y2O3 films do not generate large eroded particles and are superior to reduce the eroded particles in the etching devices. [ABSTRACT FROM AUTHOR]