High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2.

Even though the mesoporous-type perovskite solar cell (PSC) is known for high efficiency, its planar-type counterpart exhibits lower efficiency and hysteretic response. Herein, we report success in suppressing hysteresis and record efficiency for planar-type devices using EDTA-complexed tin oxide (SnO₂) electron-transport layer. The Fermi level of EDTA-complexed SnO₂ is better matched with the conduction band of perovskite, leading to high open-circuit voltage. Its electron mobility is about three times larger than that of the SnO₂. The record power conversion efficiency of planar-type PSCs with EDTA-complexed SnO₂ increases to 21.60% (certified at 21.52% by Newport) with negligible hysteresis. Meanwhile, the low-temperature processed EDTA-complexed SnO₂ enables 18.28% efficiency for a flexible device. Moreover, the unsealed PSCs with EDTA-complexed SnO₂ degrade only by 8% exposed in an ambient atmosphere after 2880 h, and only by 14% after 120 h under irradiation at 100 mW cm⁻². The development of high efficiency planar-type perovskite solar cell has been lagging behind the mesoporous-type counterpart. Here Yang et al. modify the oxide based electron transporting layer with organic acid and obtain planar-type cells with high certified efficiency of 21.5% and decent stability. [ABSTRACT FROM AUTHOR]