Optimal Design of a Converter-Machine System on a Load Profile Applied to a CAES System.

This paper deals with the design of a converter-machine system considering a set of operating points (speed, torque) composing a routine cycle. From the 1-D analytical modelling of the Permanent Magnet Synchronous Machine (PMSM) and the power electronic converter, a design methodology minimizing the power losses-to-volume ratio is established where the flux weakening control structure is considered within the system sizing. Based on a deterministic approach developed for PMSM sizing only, we propose a methodology to include the converter losses in the machine design process. Hence, we demonstrate how the computing time of calculation can be significantly reduced limiting the calculation of the flux weakening mode to a few critical power points. This method is applied to a liquid piston mechanism as part of a Compressed Air Energy Storage (CAES) system. We then validate the converter-machine design method from a 2-D analysis applied to the most significant points. Finally, the PMSM design from both methodologies with and without considering the converter losses are compared. Results highlight how the converter affects the machine sizing and the distribution of power losses to reduce the total losses of the system. [ABSTRACT FROM AUTHOR]