Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator.

Ternary organic photovoltaics (OPVs) are fabricated with PBDB-T-2Cl:Y6 (1:1.2, wt/wt) as the host system and extra PC₇₁BM as the third component. The PBDB-T-2Cl:Y6 based binary OPVs exhibit a power conversion efficiency (PCE) of 15.49% with a short circuit current (J_SC) of 24.98 mA cm⁻², an open circuit voltage (V_OC) of 0.868 V and a fill factor (FF) of 71.42%. A 16.71% PCE is obtained in the optimized ternary OPVs with PBDB-T-2Cl:Y6:PC₇₁BM (1:1.2:0.2, wt/wt) active layer, resulting from the synchronously improved J_SC of 25.44 mA cm⁻², FF of 75.66% and the constant V_OC of 0.868 V. The incorporated PC₇₁BM may prefer to mix with Y6 to finely adjust phase separation, domain size and molecular arrangement in ternary active layers, which can be confirmed from the characterization on morphology, 2D grazing incidence small and wide-angle X-ray scattering, as well as Raman mapping. In addition, PC₇₁BM may prefer to mix with Y6 to form efficient electron transport channels, which should be conducive to charge transport and collection in the optimized ternary OPVs. This work provides more insight into the underlying reasons of the third component on performance improvement of ternary OPVs, indicating ternary strategy should be an efficient method to optimize active layers for synchronously improving photon harvesting, exciton dissociation and charge transport, while keeping the simple cell fabrication technology. [ABSTRACT FROM AUTHOR]