Transient DC bias suppression of three‐port isolated DC–DC converter.

Three‐port isolated dc–dc converter, as an active exploration and trial of photovoltaic access to dc distribution system, has the advantages of superior control flexibility and high reliability. Due to the changes in the phase‐shift (PS) angle, the conventional PS control method cause transient dc bias in inductor current and magnetisation current, further increasing the current stress of switches and threatening the safe operation of the converter. Based on superposition theorem analysis, this study discusses the formation mechanism of transient dc bias, constructs a mathematical model of drive signals, and proposes two typical combination strategies of drive signals. The proposed method can simultaneously suppress the dc bias of port inductor and transformer magnetisation inductor in one switching cycle by changing the duty ratio of square wave voltage or adding the zero‐voltage phase related to the PS angle. By simulating the PS angle change and output power fluctuation, the dynamic characteristics under conventional PS control and the proposed strategy are compared and discussed. The simulation and experimental waveforms show that the proposed method is not only suitable for the multi‐step step change of PS angle, but also sufficient for the continuous evolution of the PS angle. [ABSTRACT FROM AUTHOR]