Underground Coal Fire Detection and Monitoring Based on Landsat-8 and Sentinel-1 Data Sets in Miquan Fire Area, XinJiang.

Underground coal fires have become a worldwide disaster, which brings serious environmental pollution and massive energy waste. Xinjiang is one of the regions that is seriously affected by the underground coal fires. After years of extinguishing, the underground coal fire areas in Xinjiang have not been significantly reduced yet. To extinguish underground coal fires, it is critical to identify and monitor them. Recently, remote sensing technologies have been showing great potential in coal fires' identification and monitoring. The thermal infrared technology is usually used to detect thermal anomalies in coal fire areas, and the Differential Synthetic Aperture Radar Interferometry (DInSAR) technology for the detection of coal fires related to ground subsidence. However, non-coal fire thermal anomalies caused by ground objects with low specific heat capacity, and surface subsidence caused by mining and crustal activities have seriously affected the detection accuracy of coal fire areas. To improve coal fires' detection accuracy by using remote sensing technologies, this study firstly obtains temperature, normalized difference vegetation index (NDVI), and subsidence information based on Landsat8 and Sentinel-1 data, respectively. Then, a multi-source information strength and weakness constraint method (SWCM) is proposed for coal fire identification and analysis. The results show that the proposed SWCM has the highest coal fire identification accuracy among the employed methods. Moreover, it can significantly reduce the commission and omission error caused by non-coal fire-related thermal anomalies and subsidence. Specifically, the commission error is reduced by 70.4% on average, and the omission error is reduced by 30.6%. Based on the results, the spatio-temporal change characteristics of the coal fire areas have been obtained. In addition, it is found that there is a significant negative correlation between the time-series temperature and the subsidence rate of the coal fire areas (R² reaches 0.82), which indicates the feasibility of using both temperature and subsidence to identify and monitor underground coal fires. [ABSTRACT FROM AUTHOR]