Influence of Trigger Injection on Performances of a Single-Gap Pseudospark Switch.

Trigger injection and its influence on performances of a single-gap pseudospark switch were studied by using a high-dielectric trigger unit and two types of pulse generators, where pulse parameters, polarity effect, anode voltage, and electrode geometries were varied. It is found that pulses with the rising edge of nanosecond scale can cause diffused electron emission in a large region of the trigger unit, while the slower pulses result in a localized surface flashover. The trigger injection is strongly polarity-dependent, and the way of applying the negative pulse voltage to the outer electrode is more favorable. Not all injected electrons can contribute to the triggering process, and the only factors that can lead to higher charge quantity and energetic components of electrons with a short injection delay are helpful to reduce the trigger delay. A model considering the potential penetration is presented to explain the influence of trigger injection, anode voltage, and electrode geometries. When trigger injection is strong enough or the ratio of cathode hole diameter to its thickness is relatively large, the trigger delay remains constant at different anode voltage; otherwise, it decreases as the anode voltage increases. [ABSTRACT FROM AUTHOR]