Crack-Free Conjugated PbS Quantum Dot–Hole Transport Layers for Solar Cells.

Colloidal quantum dots (QDs) benefit from solution-phase processing and band-gap tuning for their application in solar cell development. Today's QD solar cells rely on solid-state ligand exchange (SLE) to replace bulky oleic acid (OA) ligands with small 1,2-ethanedithiol (EDT) ligands to develop a conducting hole transport layer (HTL). High volume contraction in EDT conjugated QD films, however, leads to crack and porosity in the HTL, which is a major cause of concern for the device reproducibility and large-area solar cell development. We show that partial removal of the OA ligands in the solution phase reduces the volume contraction in solid films, thereby allowing the growth of crack-free QD films in the SLE process. The cleaning of QDs by repeated precipitation and redispersion using a protic methanol (MeOH) solvent helps with partial removal of the OA ligands, but it is detrimental to the electronic properties of QDs. We develop a one-step solution-phase partial ligand-exchange process using ammonium salts, which enable partial replacement of the OA ligands and passivation of the QD surface. Introduction of the facile partial ligand-exchange process eliminates the need for tedious and wasteful multiple cleaning steps with MeOH, while improving the photophysical properties of QDs. The advancement in QD processing helps to build crack-free, smooth, and conjugated QD films for their deployment as HTLs in solar cell development. Partial ligand exchange with NH₄SCN leads to a 1.5 times increase in p doping and mobility over multiple MeOH-cleaned PbS QD films. HTLs developed using NH₄SCN QDs show an improved photovoltaic performance to attain a 10.5% power conversion efficiency. Improvement in the depletion width and hole collection efficiency leads to a superior photovoltaic performance, as confirmed from experimental studies and one-dimensional solar cell capacitance simulation. [ABSTRACT FROM AUTHOR]