How to Design a 2D Active Grid for Dynamic Inflow Modulation.

In free-field operation, many aerodynamic systems are confronted with changing turbulent inflow conditions. Wind turbines are a prominent example. Here, the rotation of the rotor blades causes incoming wind gusts to result in a local change in the angle of incidence for the blade segments, which changes the effective angle of attack and can lead to dynamic non-linear effects like dynamic stall. Dynamic stall is known to produce a significant overshoot in the acting forces and thus an increase in loads acting on the wind turbine, leading to long-term fatigue. To gain a better understanding, it is necessary to perform wind tunnel experiments under realistic and reproducible inflow with defined conditions. In this study, a so-called 2D active grid is presented, which allows the generation of defined two-dimensional inflow conditions for wind tunnel experiments. The focus is on generating sinusoidal transversal and longitudinal gusts with high amplitudes and frequencies. Different grid configurations and sizes are tested to investigate differences in the generated flow fields. Transversal gusts imposed in this way can be used to study dynamic phenomena without having to move the object under investigation itself. Inertial effects during force measurements and a changing shadow casting due to moving airfoils in particle image velocimetry measurements are thus avoided. The additional possibility to generate defined longitudinal gusts allows to generate a broad range of reproducible inflow situations like yaw or tower shadow effects during experimental investigations. [ABSTRACT FROM AUTHOR]