Integrated Control of Active Front Wheel Steering and Active Suspension Based on Differential Flatness and Nonlinear Disturbance Observer.

Mechanical elastic wheel (MEW) has the advantage of explosion-proof, which helps to guarantee the safety and maneuverability of the automobile. Aiming to improve the stability of vehicles matching with MEW, this paper proposes an integrated control strategy that combines the active front steering and the active suspension systems. The integrated controller consists of feed-forward and feedback controllers. Firstly, the differential flatness system of the vehicle is constructed concerning the coupling among yaw, lateral, and roll motion. And the flatness based feed-forward control inputs of the desired front wheel angle and active roll moment are derived. At the same time, the backstepping-adaptive feedback controllers for yaw rate and roll angle are designed. Then, the feed-forward and feedback controllers are coordinated and their weight coefficients are adjusted according to the sideslip angle. Furthermore, this paper also adopts a nonlinear disturbance observer to estimate the vertical load of MEW. The influence of the vertical load is fully considered when estimating the equivalent cornering stiffness of each MEW, so as to realize the online adjustment of the controller parameters. Finally, the maneuver tests of step input steering and double lane change are simulated, respectively. The results show that the proposed control strategy yields a better control effect than the fuzzy-PID controller, and the performance of the vehicle matching with MEW has been significantly improved. [ABSTRACT FROM AUTHOR]