Production and optimization of the modulus of elasticity, modulus of rupture, and impact energy of GLP-HDPE composite materials using the robust Taguchi technique.

With the increase in the use of high-density polyethylene (HDPE) products and the serious long-term hazard they pose to the environment, there has been an increasing need to decrease the release of these materials to the environment as waste. This study sets out to develop and optimize the mechanical properties of the GLP-HDPE composite, a sustainable material made from agro residues (ginger leaf particles (GLP)) and high-density polyethylene waste materials. The Taguchi robust technique, analysis of variance, and regression analysis were employed to optimize, analyze, and model the behavior of the composite materials with respect to the developmental factors of particle size and particle content. The optimum bending modulus of elasticity (MOE), modulus of rupture (MOR), and impact energy (IE) of the developed composites was 2490 MPa, 11.90 MPa, and 4.1 J at a particle size/particle content combination of 710 µm/35%, 520 µm/35%, and 710 µm/45%, respectively. Analysis of variance at 95% confidence level showed that the particle content had a significant effect on the MOE, MOR, and IE of the GLP-HDPE composite with a minimum percentage contribution of 71.61%. Equations for predicting the MOE, MOR, and IE of the composites were developed with good prediction accuracy. [ABSTRACT FROM AUTHOR]