Effects of Sulfur on the Surface Crack in Medium Carbon Bloom.

The surface cracking problem in medium carbon sulfur‐containing steel is gradually emerging in continuous casting production. Therefore, this article investigates the effect of sulfur content on the surface cracks of medium carbon steel. In addition to macroscopic cracks, network cracks are visible on the surface of medium carbon sulfur‐containing bloom. 3D confocal laser scanning microscopy and industrial computed tomography are used to characterize the 3D realistic morphology of the network and macroscopic cracks. Thermodynamic calculations and hot ductility tests' results exhibit the higher precipitation of MnS in the sulfur‐containing steel, resulting in the second brittle zone of steel. The microstructure near the cracks revealed a high correlation between cracks and a high proportion of proeutectoid ferrite near the surface of the medium carbon sulfur‐containing bloom. In addition, the sulfur‐containing steel has 0.05% more linear shrinkage than the low‐sulfur steel during the transformation from austenite to ferrite, which increases its crack sensitivity. As a result, this article clarifies the effect of sulfur on the surface crack of medium carbon bloom. [ABSTRACT FROM AUTHOR]