Open-Circuit Switching Fault Analysis and Tolerant Strategy for Dual-Active-Bridge DC–DC Converter Considering Parasitic Parameters.

The dual-active-bridge (DAB) is a typical topology of dc–dc converter for bus connection, voltage conversion, power transmission, and electrical isolation in dc power grids. The open-circuit switching fault (OCSF) may threaten the safe operation of DAB and should be eliminated in time. However, the researches on parasitic parameters mainly focus on traditional dc–dc converters, and there are still few discussions on parasitic parameters in the high-frequency dc–dc converter such as DAB. The power components are usually considered without parasitic parameters in OCSF analysis and tolerant control, leading to deviations in modality analysis and practical control for DAB. To solve this issue, the modality analysis considering parasitic parameters during OCSF in DAB is investigated, and the sneak circuits and electrical characteristics with parasitic parameters are discussed in this article. Besides, to realize fault tolerance for DAB during OCSF considering parasitic parameters, a new fault tolerance control strategy including modeling, topology transformation principle, and practical control architecture are also proposed. Compared with conventional fault tolerance strategy, the proposed strategy will be more efficient, rapid and feasible for DAB during OCSF process. The experimental results in DAB prototype verify correctness and effectiveness of analysis and proposed strategy. [ABSTRACT FROM AUTHOR]