Comparison and Optimization of a Magnetic Lead Screw Applied in Wave Energy Conversions.

In order to improve the power density of the wave power generation system, a magnetic lead screw (MLS) is introduced in this paper as a speed-increasing device in a wave energy converter (WEC), which converts low-speed linear wave motion to high-speed rotational motion. Then, several types of MLSs with different topologies, which were optimized, are described. Finite element analysis (FEA) was used to investigate and evaluate their electromagnetic performances, such as the thrust force, torque, air gap magnetic density, etc. The optimized MLS prototype was manufactured, and the measurements verify the FEA results. Finally, a magnetic lead screw hybrid generator (MLSHG) for application to the WEC is proposed. This MLS significantly improved the power density under different wave conditions. When the moving speed v = 0.15 m/s, the output power of the MLSHG and outer-PM linear tubular generator were 923 W and 87 W, respectively, when the load resistance was 5 Ω. The output power of the MLSHG was more than 10 times compared to that of the outer-PM linear tubular generator in a fair comparison. Here, it is shown that the power density and output power of were MLSHG increased greatly. [ABSTRACT FROM AUTHOR]