The Influence of Freeze–Thaw Cycles and Corrosion on Reinforced Concrete and the Relationship between the Evolutions of the Microstructure and Mechanical Properties.

Freeze–thaw cycles (FTCs) and steel bar corrosion (SBC) are the most common service conditions of hydraulic concrete and have significant impacts on its durability. Using pullout and microscopic tests of different FTC and SBC rates, we selected the mass loss rate, ultrasonic velocity, bond strength and bond slip in order to describe the changes in the macro-properties, and also selected the porosity and pore size distribution as micro-parameters in order to explore the influence of FTCs and SBC on the mechanical properties of hydraulic concrete. The results showed that the bond strength decreased as the FTCs increased due to the microstructure damage caused by FTC and SBC, which affects the mechanical properties. A corrosion rate of ≤3% offset the damage caused by 50 FTCs. FTCs and SBC resulted in superimposed damage effects on the concrete. In addition, we established a bond strength damage model based on the joint FTCs and SBC and quantitatively described the degradation law of the macro-mechanical properties. The analysis shows that the influence of FTCs on the bond strength was greater than that of the SBC. These research results can provide a reference and experimental support for the frost-resistant design and durability prediction of hydraulic concrete structures in cold environments. [ABSTRACT FROM AUTHOR]