Effect of Laser Surface Texturing on the Tribological Properties and Scuffing Mechanism of CKS Piston Ring Against Cast Iron Cylinder Liner Under High Intensifying.

The objective of this study is to characterize and understand the evolutionary processes that the effect of surface texture has on the tribology properties of the Chrom-Keramik-Schicht (CKS) piston ring/cast iron cylinder liner system under high intensifying. Surface dimple textures with an area density of 3–9% were prepared on the CKS piston ring by YAG laser, and the antifriction and antiscuffing properties were tested on a reciprocating test rig at 200 °C and 80 MPa. The minimum friction coefficient and wear loss were both obtained at the area density of 5%, compared with the untextured cylinder liner–piston ring (CLPR). The friction coefficient decreased by 0.013 to 0.086, and the wear loss for the piston ring and cylinder liner decreased by 41% and 46%, respectively. The sharp decrease of the friction force induced by surface polishing of the cylinder liner is taken as a sign to indicate the cylinder scuffing under starved lubrication. The scuffing time for the piston ring/cylinder liner system reached a maximum value of 18 min at an area density of 3%, which is extended about 41% compared with that of the untextured piston ring. The dimple surface texture on the piston ring could extend the scuffing time by delaying the occurrence of polishing behavior on the surface of cylinder liner. It is found that the retarded surface polishing played a major role for the modification of the antiscuffing property of the friction pairs according to the friction curves and wear morphologies. [ABSTRACT FROM AUTHOR]