IMPROVEMENT AND SENSITIVITY ANALYSIS OF EQUIVALENT HEAT TRANSFER MODEL FOR DYNAMIC THERMAL RATING OF OVERHEAD LINES.

With the rapid growth of power demand, the conductor ampacity calculation method based on the dynamic thermal rating (DTR) becomes more and more important. Based on the shortcomings of the current DTR models, a new DTR model that does not need to measure the wind speed and the operating state of conductor is proposed, which is called the equivalent heat transfer (EHT) model. However, there are still shortcomings in the accuracy of the EHT model in application. In this paper, the EHT model is improved at first according to the consideration of the effect of air physical parameters and the redetermination of the experimental parameters of the EHT equipment. Then, the operation of EHT equipment is simulated through the established experimental platform. The improved EHT model is verified by the IEEE standard. Finally, the sensitivity analysis of the improved EHT model is carried out. The results show that the improved EHT model is greatly improved on application accuracy compared to the original EHT model. Moreover, the improved EHT model can choose the steady-state temperature at any position on the surface of the aluminum ball to calculate the conductor ampacity, and the relative error does not exceed 6%. The improved EHT model is reliable and can meet the safe operation requirements of the power system in practical engineering applications. [ABSTRACT FROM AUTHOR]