Seismic-Induced Track Spectrum Characteristics of High-Speed Railway Bridges.

The construction of high-speed railways continues to extend in seismic prone areas, but there is limited research on the seismic-induced track irregularities occurred in positions where high-speed railway bridges are involved. Taking a five-span high-speed railway simply supported beam bridge as the engineering example, the corresponding nonlinear system model, with CRTS II slab ballastless track, is established by using ANSYS finite element analysis software. The distribution mode of post-earthquake track residual irregularity is studied, the statistical characteristics of its power spectral density are analyzed, and a representative seismic-induced track geometric irregularity spectrum is constructed. The effects of the site categories and the epicenter distance on seismic-induced track spectrum are also discussed. The results show that after the earthquake, the alignment irregularity is significant, while the vertical, cross-level and gauge irregularities can be ignored. The amplitude of track geometric irregularity, caused by earthquake, increases significantly with the increase of ground motion intensity. The seismic-induced track spectrum obeys lognormal distribution at all frequencies. The track spectra almost coincide for all five site categories, thus, the impact of site categories on the seismic-induced track spectrum of high-speed railway bridges is considered negligible. Due to the pulse effect, the seismic-induced track spectrum of near-field earthquakes is significantly larger than that of far-field earthquakes. [ABSTRACT FROM AUTHOR]