Mechanical Testing of Connections Blind Bolted to the Thick Glass-Fiber-Reinforced Polymer Spar Cap of a Decommissioned GE37 Wind Turbine Blade.

Millions of tons of glass-fiber-reinforced polymer (GFRP) composite wind turbine blades are expected to age out of service over the next 30 years. Research is being conducted on repurposing these structures as new civil infrastructure products. The GFRP material in these decommissioned wind blades has been shown to retain significant strength and stiffness for second-life applications. However, for repurposing as new products, they will need to be connected to other structural members. The connections employed for this need to be designed, evaluated, and tested prior to their use. Here, we present the results of detailed testing of bolted connections for load-carrying appurtenances that will carry the phases and shield wires (e.g., insulators, crossarms, davits, guy wires, posts) to the spar cap of an 11-year-old 1.5 MW GE37 wind blade, intended for use as a repurposed transmission pole (i.e., a BladePole). Details of ASTM-type pull-out and bearing capacity tests using different types of blind bolts, and tests of a full-scale steel bracket connection called a "universal connector," are reported. The effects of the different blind bolts, pin diameters, and loading directions relative to the composite laminate structure (longitudinal or transverse) for both the coupon- and full-scale connector bracket tests are described. The ability to design and construct robust connections for repurposed wind blade structures was demonstrated. [ABSTRACT FROM AUTHOR]