Study on the thermal kinetics and microscopic characteristics of oxidized coal.

Revealing the characteristics of spontaneous combustion and re-combustion of oxidized coal is of great significance for the coal fire prevention and control. Synchronous Thermal Analyzer (STA) and Fourier Transform Infrared Spectrometer (FTIR) were used to measure the thermal kinetics and microscopic characteristics of coal samples with different oxidation degrees (unoxidized, 100 ℃, 200 ℃ and 300 ℃ oxidized coal). It is found that the characteristic temperatures decrease first and then increase with the increasing degree of oxidation. The ignition temperature of 100 ℃-O coal (oxidized at 100 ℃ for 6 h) is relatively the lowest at 334.1 ℃. Pyrolysis and gas-phase combustion reactions dominate the weight loss process, while solid-phase combustion reactions are relatively minor. The gas-phase combustion ratio of 100 ℃-O coal is the highest at 68.56%. With the deepening of coal oxidation degree, the relative content of aliphatic hydrocarbons and hydroxyl groups gradually decreases, while that of oxygen-containing functional groups (C-O, C = O, COOH, etc.) increases first and then decreases, reaching the highest value of 42.2% at 100 ℃. Moreover, the 100 ℃-O coal has the minimum temperature at the point of maximum exothermic power of 378.5 ℃, the highest exothermic power of -53.09 mW/mg and the maximum enthalpy of -18,579 J/g. All results show that 100 ℃-O coal has the highest risk of spontaneous combustion than the other three coal samples. This suggests that there is a maximum point of spontaneous combustion risk in the range of pre-oxidization temperatures of oxidized coal. [ABSTRACT FROM AUTHOR]