A fast calibration method for distributed measurement systems.

Aiming at the distributed measurement system multi-equipment coordinated measurement, the data measured by each transmitting station are unified under a common coordinate system, which has the problems of complicated operation and high time and cost. In this paper, a fast calibration method for distributed measurement systems based on standard devices is proposed. The method designs a new type of architectural calibration board with non-coplanar measurement nodes, calculates the coordinates of the measurement nodes using geometric relations, solves the initial values of the system parameters, and substitutes the initial values into the L-M least squares algorithm for iterative optimization so that it only needs to carry out one scanning measurement for each reference position in the calibration process to complete the calibration. We designed an experiment in which a distributed measurement system consisting of four transmitting stations measured three standard rods (1650.073, 1156.704, and 875.950 mm) sequentially after calibration in a measuring space of 5 × 5 × 3 m³. The experimental results show that under the premise of ensuring that the measurement accuracy is better than 0.20 mm, the calibration of the parameters of the distributed measurement system can be completed within 20 min. [ABSTRACT FROM AUTHOR]