Highly Selective Chemiresistive SO2 Sensor Based on a Reduced Graphene Oxide/Porphyrin (rGO/TAPP) Composite.

The emergence of toxic pollutants due to heavy human intervention in the ecosystem causes serious environmental problems. Therefore, sensors based on material having a strong affinity towards specific environmental gaseous pollutants are urgently needed. The present study deals with chemiresistive gas sensors for the detection of sulfur dioxide (SO₂) based on a composite of reduced graphene oxide (rGO) and 5,10,15,20-tetrakis(4-aminophenyl) porphyrin (TAPP). The improved Hummers method was used to synthesize graphene oxide (GO); it was further thermally reduced to rGO. The pattern of the copper electrode was coated on glass slides with a shadow mask using thermal evaporation. Then, GO was drop-cast between the two copper electrodes, thermally reduced to obtain rGO, and then modified by TAPP. The spectroscopic, structural, morphological, electrical, and optical studies were carried out using Fourier transform infrared spectroscopy, x-ray diffraction, Raman spectroscopy, atomic force microscopy, field emission scanning electron microscopy, current–voltage (I–V) and UV–visible spectroscopy, respectively. The developed sensor shows high selectivity towards SO₂ gas analytes among exposed gaseous analytes. It exhibited reproducible response from 50 ppm to 200 ppm with enhanced repeatability at 50 ppm. The rGO/TAPP sensor exhibited a significant response (57 s) and recovery time (61 s), with a 5 ppm limit of detection. [ABSTRACT FROM AUTHOR]