A feasibility study on time-lapse controlled-source electromagnetic method for hydraulic fracturing monitoring of Well Eyangye-2HF in Yichang, Hubei Province, China.

Hydraulic fracturing plays a crucial role in enhancing reserves and production of unconventional oil and gas resources. Injecting fracturing fluids into the ground to improve reservoirs also introduces the risk of inducing earthquakes; thus, monitoring the migration of these fluids is crucial. The microseismic positioning method determines the fracturing fluid by locating microseismic events generated by the fractured rock strata; however, this method is susceptible to errors. Low-resistivity subsurface fluids can directly change electromagnetic field signals, making the electromagnetic method a technically advantageous approach for monitoring the migration of hydraulic fracturing fluids. The monitoring test data of Well Eyangye-2HF show that the time-lapse controlled-source electromagnetic (CSEM) method is suitable for hydraulic fracturing and has good monitoring effects. The results of CSEM method can also compensate for deficiencies in microseismic monitoring. The electric field (E_x) observed using the CSEM method can directly predict the distribution edge of the fracturing fluid, and the anomalous zone of the E_x rate of change is consistent with the fracturing-fluid injection parameters and microseismic monitoring results. The analysis of field data and forward simulation, based on electrical logging results, led to the conclusion that hydraulic fracturing operations can cause changes in the resistivity of the target layer and surrounding strata. These changes are attributed to the synergistic effects of formation stress, temperature, and the fracturing fluid. The electric-field changes observed using the CSEM method may be caused by multiple factors; however, use of time-lapse CSEM for monitoring hydraulic fracturing is still feasible. [ABSTRACT FROM AUTHOR]