Research on High‐Efficiency Curved Surface Polishing with Even Distribution of Slurry Based on Dielectrophoresis.

To overcome the problems of low slurry utilization and poor surface uniformity in conventional small tool polishing of curved surfaces, a small tool polishing method based on slurry dielectrophoresis (STP‐DEP) is proposed. The dielectrophoretic effect distributes the slurry evenly and increases its dwell time in the processing area, enabling more abrasives to participate in polishing, thereby improving the material removal efficiency and surface uniformity of the workpiece. The observation experiment indicates that dielectrophoresis can efficiently distribute the slurry evenly. Compared with the traditional small tool polishing, the results show that the polishing efficiency of the STP‐DEP is improved by 34% on the premise of achieving the same surface roughness Ra of the workpiece. The Taguchi experiments are carried out on K9 convex lens. Results show that the optimal surface roughness Ra 3.3 nm (initial Ra 2400 nm, processing time 120 min) is obtained when the tool speed is 400 rpm, the pressing amount is 1 mm, the infeed angle is 15°, and the abrasive size is 3 μm. The research proves that the STP‐DEP successfully solves the problem of slurry uneven distribution, and realizes efficient surface polishing with high surface uniformity. [ABSTRACT FROM AUTHOR]