Droplet deposition of agrochemical spraying: Comparison of results from a random‐walk model and CFD simulations.

The effectiveness of agricultural spraying processes depends considerably on the ability of the atomized droplets to reach the target site in the desired amount. In this work, two mathematical models to study the trajectories and deposition of atomized droplets are implemented and compared. On the one hand, a computational fluid dynamics (CFD) coupled with discrete phase model (DPM) is implemented to calculate the trajectories of atomized droplets and determine distances at which the droplets are deposited. The continuous phase (atmospheric air) is modelled by continuity, momentum, and energy equations. On the other hand, a Lagrangian random‐walk (LRW) model based on force and energy balances to predict the pulverization process of a nozzle is formulated and implemented in Python. Both models take into account the effects of drag, gravity, buoyancy, and evaporation on individual droplets, as well as the impact of atmospheric stability and dispersion. By tracking a large number of trajectories, meaningful estimates of dispersal statistics can be obtained. The LRW model accurately replicated the trajectories, deposition distances, and final diameters of atomized droplets for three atmospheric stability cases, compared with CFD simulation results. The results of both models agreed that 100 μm droplets were most susceptible to wind‐induced spray drift, depositing at the furthest distances from the nozzle. In addition, 50 μm droplets exhibited a significant tendency to evaporate entirely before reaching the ground. The LRW model is found to be a cost‐effective alternative for estimating spray drift compared to the computationally intensive CFD approach. [ABSTRACT FROM AUTHOR]