Testing Digital Elevation Model of Difference (DoD) Estimation of Washover Fan Thickness, Matagorda Peninsula, Texas.

Williams, H.F.L., 2024. Testing digital elevation model of difference (DoD) estimation of washover fan thickness, Matagorda Peninsula, Texas. Journal of Coastal Research, 40(5), 852–859. Charlotte (North Carolina), ISSN 0749-0208. Washover fans are a fundamental component of coastal sediment budgets. While fans can be relatively easily delineated on air photos to obtain fan area, measurement of fan thickness, which is required for volume estimation, is problematic. Field surveys can be conducted, but fieldwork can be labor-intensive, costly, and time-consuming and have access problems. This study used pre- and poststorm LIDAR digital elevation models (DEMs) to create a digital elevation model of difference (DoD), which was then used to estimate the mean thicknesses of 10 Hurricane Harvey washover fans on Matagorda Peninsula, Texas. The accuracy of the LIDAR-derived fan thicknesses was assessed by comparing the LIDAR results to fan mean thicknesses based on pits excavated into fans. Seven out of 10 LIDAR-based thicknesses underestimated pit-based thicknesses, suggesting the presence of systematic bias in the LIDAR-derived DEMs. Underestimation of fan thicknesses was in the range of 36% to 56%. The source of the suspected bias is uncertain; it is possible that compaction of marsh sediments by the washover fans lowered the fans and reduced their apparent thicknesses. It is concluded that pre- and post-storm LIDAR DEMs can be used to estimate washover fan thickness, but in areas of compactible substrates, such as coastal marshes, steps should be taken to identify, evaluate, and address potential bias in the DEM data. [ABSTRACT FROM AUTHOR]