تأثیر فرایند روغن گرمایی بر عملکرد بیولوژیکی فیزیکی و مکانیکی گرماچوب تولید شده.

Background and Objectives: Wood has some limitations in properties and applications due to its natural nature, which need to be modified. Wood modification is usually done with different aims and methods. One of the wood modification methods is thermal treatments in order to improvement of dimensional stability and biological resistance. But, it is surely affected on physical and mechanical properties of wood. Wood thermal modification in presence of oxygen causes the oxidation of its chemical structure which leads to detrimental effects on physical and mechanical properties. Therefore, elimination of oxygen in thermal modification can reduce its destructive effects. In current study, the effect of thermo-oil process on the function of white rot fungus has been investigated. Moreover, the effect of this process on engineering properties of birch and pine wood species was evaluated. Methodology: In this study, two wood species of birch (Betula sp.) and pine (Pinus sp.) wood were cut into the desired lumbers. Heat treatment of the prepared lumbers was carried out in a cylinder which is equipped with pressure and vacuum system. Also, industrial recycled oil was used for heat treatment of the lumbers. The temperature and time of treatment were selected as 195 °C and 5 hours, respectively. At the end of the process, the used oil was drained into the oil storage tank and the lumbers were removed from the cylinder after applying vacuum. In order to investigation of biological resistance as well as physical and mechanical properties (water absorption and swelling, density, mass loss, bending strength, compression strength parallel to the grain and impact strength) test specimens were prepared from the treated and control lumbers based on the standard. The SPSS software was used for statistical analysis. The results were statistically analyzed based on a One-Way ANOVA method. Results: Results revealed that thermo-oil treatment can reduce the functionality of white rot fungus and also its efficiency on physical and mechanical properties of both wood species. Moreover, the results showed that this process improved the physical properties and reduced the mechanical properties, except compression strength parallel to the grain. Conclusion: Thermo-oil treatment at high temperature causes structural changes of wood and affects its physical and mechanical properties. Also, the structural changes caused by heat treatment can be an effective and inhibiting factor to functionality of white rot fungus on physical and mechanical properties of wood. [ABSTRACT FROM AUTHOR]