Performance Evaluation of CO 2 + SiCl 4 Binary Mixture in Recompression Brayton Cycle for Warm Climates.

This work demonstrates the potential of CO₂ + SiCl₄ binary mixture as a working fluid for power generation cycle. Recompression Brayton cycle configuration is considered due to its proven record of high performance for medium- to high-temperature sources. The objective of this study is to assess the thermodynamic performance of a recompression Brayton cycle using a CO₂ + SiCl₄ binary mixture as a working fluid, particularly under warm climate conditions. The cycle is simulated using the Peng–Robinson equation of state in Aspen Hysys (v11) software, and the model is validated by comparing VLE data against experimental data from the literature. The analysis involves the assessment of cycle's thermal efficiency and exergy efficiency under warm climatic conditions, with a minimum cycle temperature of 40 °C. The results demonstrate a notable improvement in the cycle's thermodynamic performance with CO₂ + SiCl₄ binary mixture compared to pure CO₂. A small concentration (5%) of SiCl₄ in CO₂ increases the thermal efficiency of the cycle from 41.7% to 43.4%. Moreover, irreversibility losses in the cooler and the heat recovery unit are significantly lower with the CO₂ + SiCl₄ binary mixture than with pure CO₂. This improvement enhances the overall exergy efficiency of the cycle, increasing it from 62.1% to 70.2%. The primary reason for this enhancement is the substantial reduction in irreversibility losses in both the cooler and the HTR. This study reveals that when using a CO₂ + SiCl₄ mixture, the concentration must be optimized to avoid condensation in the compressor, which can cause physical damage to the compressor blades and other components, as well as increase power input. This issue arises from the higher glide temperature of the mixture at increased SiCl₄ concentrations and the limited heat recovery from the cycle. [ABSTRACT FROM AUTHOR]