Exploring the Relationship Between Electrical Characteristics and Changes in Chemical Composition and Structure of OSG Low- K Films Under Thermal Annealing.

The influence of annealing temperature on the chemical, structural, and electrophysical properties of porous OSG low-k films containing terminal methyl groups was investigated. The films were deposited via spin coating, followed by drying at 200 °C and annealing at temperatures ranging from 350 °C to 900 °C. In the temperature range of 350–450 °C, thermal degradation of surfactants occurs along with the formation of a silicon-oxygen framework, which is accompanied by an increase in pore radius from 1.2 nm to 1.5 nm. At 600–700 °C, complete destruction of methyl groups occurs, leading to the development of micropores. FTIR spectroscopy reveals that after annealing at 700 °C, the concentration of silanol groups and water reaches its maximum. By 900 °C, open porosity is no longer observed, and the film resembles dense SiO₂. JV measurements show that the film annealed at 450 °C exhibits minimal leakage currents, approximately 5 × 10⁻¹¹ A/cm² at 700 kV/cm. This can be attributed to the near-complete removal of surfactant residues and non-condensed silanols, along with non-critical thermal degradation of methyl groups. Leakage current models obtained at various annealing temperatures suggest that the predominant charge carrier transfer mechanism is Poole–Frenkel emission. [ABSTRACT FROM AUTHOR]