A Force Control Method Integrating Human Skills for Complex Surface Finishing.

Force control is one of the core modules for surface finishing such as grinding, polishing and sanding. However, the current force control methods based on human skills lack in-depth analysis of data patterns or are only applicable to flat surfaces. In addition, surface finishing is mainly performed by hand, resulting in low processing efficiency and poor product consistency. Therefore, this paper proposes a force control method that incorporates human skills to achieve relatively accurate force skill transfer and complex surface finishing. Firstly, human skills consisting of the force skill and the motion skill are learned. The force skill is used to generate the desired force. Then, a series of discrete poses are obtained based on human demonstration and combined with the motion skill to generate the desired trajectory. Finally, a computed-torque impedance control method is proposed to achieve relatively accurate force skill transfer and complex surface finishing by incorporating the desired trajectory and the desired force. The experiments are conducted on a platform composed of a 7-DOF collaborative robot manipulator from Franka Emika and a complex violin surface. The results demonstrate that the proposed force control method can achieve relatively accurate force skill transfer and improve the surface quality of the workpiece. [ABSTRACT FROM AUTHOR]