Preparation and Physical Properties of Quaternary Mn 2 FeSi 0.5 Al 0.5 Alloy Powders with Heusler and β-Mn Structures.

Manganese-based alloys with the composition Mn₂FeZ (Z = Si, Al) have been extensively investigated in recent years due to their potential applications in spintronics. The Mn₂FeSi alloy, prepared in the form of ingots, powders, or ribbons, exhibits either a cubic full-Heusler (L2₁) structure, an inverse-Heusler (XA) structure, or a combination of both. In contrast, the Mn₂FeAl alloy has so far been synthesized only in the form of ingots, featuring a primitive cubic (β-Mn type) structure. This study focuses on the new quaternary Mn₂FeSi_0.5Al_0.5 alloy synthesized from pure Mn, Fe, Si, and Al powders via mechanical alloying. The elemental powders were ball-milled for 168 h with a ball-to-powder ratio of 10:1, followed by annealing at 550 °C, 700 °C, and 950 °C for 8 h in an argon protective atmosphere. The results demonstrate that annealing at lower temperatures (550 °C) led to the formation of a Heusler structure with a lattice constant of 0.5739 nm. Annealing at 700 °C resulted in the coexistence of several phases, including the Heusler phase and a newly developed primitive cubic β-Mn structure. Further increasing the annealing temperature to 950 °C completely suppressed the Heusler phase, with the β-Mn structure, having a lattice constant of 0.6281 nm, becoming the dominant phase. These findings confirm the possibility of tuning the structure of Mn₂FeSi_0.5Al_0.5 alloy powder—and thereby its physical properties—by varying the annealing temperature. The sensitivity of magnetic properties to structural changes is demonstrated through magnetization curves and zero-field-cooled/field-cooled curves in the temperature range of 5 K to 300 K. [ABSTRACT FROM AUTHOR]