DIAMOND DEPOSITION ON WC/Co ALLOY WITH A MOLYBDENUM INTERMEDIATE LAYER.

It is known that in the condition of chemical vapor deposition (CVD) diamond process, molybdenum is capable of forming carbide known as the "glue" which promotes growth of the CVD diamond, and aids its adhesion by (partial) relief of stresses at the interface. Furthermore, the WC grains are reaction bonded to the Mo₂C phase. Therefore, molybdenum is a good candidate material for the intermediate layer between WC–Co substrates and diamond coatings. A molybdenum intermediate layer of 1–3 μm thickness was magnetron sputter-deposited on WC/Co alloy prior to the deposition of diamond coatings. Diamond films were deposited by hot filament chemical vapor deposition (HFCVD). The chemical quality, morphology, and crystal structure of the molybdenum intermediate layer and the diamond coatings were characterized by means of SEM, EDX, XRD and Raman spectroscopy. It was found that the continuous Mo intermediate layer emerged in spherical shapes and had grain sizes of 0.5–1.5 μm after 30 min sputter deposition. The diamond grain growth rate was slightly slower as compared with that of uncoated Mo layer on the WC–Co substrate. The morphologies of the diamond films on the WC–Co substrate varied with the amount of Mo and Co on the substrate. The Mo intermediate layer was effective to act as a buffer layer for both Co diffusion and diamond growth. [ABSTRACT FROM AUTHOR]