Environmental degradation of carbon nanotube-modified composite laminates: a study of electrical resistivity.

The environmental durability of carbon nanotube (CNT)-modified carbon-fibre-reinforced polymers (CFRPs) is investigated. The key problem of these new-generation composites is the modification of their polymer matrix with nanoscaled fillers. It was recently demonstrated that the damage tolerance of these materials, as manifested by their fracture toughness, impact properties, and fatigue life, can be improved by adding CNTs at weight fractions as low as 0.5%. This improvement is mainly attributed to the incorporation of an additional interfacial area between the CNTs and the matrix, which is active at the nanoscale. However, this additional interface could have a negative effect on the environmental durability of the aforementioned systems, since it is well known that the moisture absorption ability of a matrix is enhanced by the presence of multiple interfaces, which serve as an ingress route to water. To examine this problem, CNT-modified CFRPs were exposed to hydrothermal loadings. At specified intervals, the composites were weighted, and the water uptake vs. time was recorded for both the modified and a reference systems. The electrical conductivity of the composites was registered at the same time intervals. After the environmental exposure, the interlaminar shear properties of the conditioned composite systems were measured and compared with those of unmodified composites, as well as with the shear properties of unexposed laminates. [ABSTRACT FROM AUTHOR]