Relationship Between the Geometric Parameters of Rock Fractures, the Size of Percolation Clusters and REV.

Modeling fractured rocks with numerical methods requires some derived parameters, among which the fracture network connectivity and the size of the representative elementary volume (REV) are both of crucial importance. Percolation and REV analyses were made by the RepSim code. The program uses input parameters such as fractal dimension of the fracture midpoints ( D), length exponent ( E) and relative dip ( α) data. For percolation analysis, the relative sizes of the largest percolation clusters have been calculated by stochastic realizations of the simulated fracture networks with different parameter triplets. Furthermore, fracture networks can be classified into three major types on the basis of their ( E, D, α) parameters. For the REV calculations, the porosity of the generated fracture network was calculated. The derived REV size of a fracture network depends essentially on input parameters and shows a decreasing tendency with increasing D and E and vice versa. The method mentioned above was tested on both metamorphic samples of the Pannonian Basin and Variscan granitoid rocks of the Mórágy Complex. Percolation values predicted for the Mórágy granite are highly sensitive to alterations in the input parameters. The amphibolite bodies displayed a modeled fracture network with 80 to 90% of all fractures being interconnected, while the largest achievable percolation cluster size of gneiss is less than 10%. The REV size of the amphibolite is about 20 m as a result of connected fractures filling the whole body, while gneiss has lower porosity and higher REV (approximately 70 m). [ABSTRACT FROM AUTHOR]