Back to Search Start Over

Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C.

Authors :
Kutnar, Andreja
Kamke, Frederick
Source :
Wood Science & Technology; Jan2012, Vol. 46 Issue 1-3, p73-88, 16p
Publication Year :
2012

Abstract

In this paper, the compressive deformation of hybrid poplar wood ( Populus deltoides × Populus trichocarpa) at high temperature (150, 160, and 170°C) and under various conditions of steam pressure was studied. Temperature and conditions of steam environment affected the relative density change and creep deformation during compression, as well as properties of the resulting densified material. While the temperature significantly affected the compression deformation of specimens compressed under transient and superheated steam conditions, temperature within the range studied had little effect on the compressive deformation in saturated steam. In all tested conditions, compression deformation was achieved without cell wall fractures. Higher temperature of compression, regardless of steam condition, resulted in lower equilibrium moisture content. In specimens compressed under saturated steam, the modulus of rupture (MOR) and modulus of elasticity (MOE) were increased proportionally to the increase in density, while the compression under superheated steam produced lower increase in the MOE and MOR than expected based on the increase in density. Compression in transient steam conditions at 170°C produced densified wood with higher MOE and MOR than expected based on the increase in density. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
00437719
Volume :
46
Issue :
1-3
Database :
Complementary Index
Journal :
Wood Science & Technology
Publication Type :
Academic Journal
Accession number :
70162490
Full Text :
https://doi.org/10.1007/s00226-010-0380-0