Transient strain of high strength concrete at elevated temperatures and the impact of polypropylene fibers.

This paper presents the results of an experimental study on the transient strain of high strength concrete (HSC) under heating up to 750°C and the impact of polypropylene (PP) fibers. Concerning this topic only few results are available in the literature and systematic investigations are missing. However, basic knowledge is necessary for the understanding of the internal damage processes in the material as well as for heated structures. The transient strain during heating can be separated in two basic components: the free thermal strain and the mechanical strain. They were experimentally determined exemplarily for one HSC. For the determination of the mechanisms of transient strain and particularly the influence of PP fibers different techniques were applied. In this context the monitoring of the microcracking was done for the first time with acoustic emission analysis in combination with ultrasonic measurements. This new approach helps fundamentally to explain the impact of PP fibers on free thermal strain and mechanical strain during heating up. Furthermore weight loss measurements were carried out to characterize the moisture transport. It was shown that the PP fibers cause an acceleration of the moisture transport in the temperature range from 200 to 250°C which leads to drying shrinkage in opposite direction to the free thermal strain. Hence this paper is a contribution to the general understanding of the impact of PP fibers in HSC at high temperatures and emphasizes the important influence of PP fibers on the thermal and mechanical induced strain of HSC. [ABSTRACT FROM AUTHOR]