Estimating quality costs in an automotive stamping plant through the use of simulation.

The pressures of modern manufacturing require that the quality–cost benefits are determined when evaluating new procedures or alternative operating policies. Traditionally, cost reports and other quality metrics have been used for this purpose. However, the interactions between the main quality cost drivers cannot be understood at the superficial level and the effect that a new process or an alternative operating policy may have on quality costs is difficult to determine. An alternative to the traditional costing methods is simulation. The current work uses simulation to evaluate quality costs in an automotive stamping plant where the quality control is determined by operator inspection of their own work. Self-inspection quality control provides instantaneous feedback of quality problems, allowing for quick rectification. However, the difficult nature of surface finish inspection of automotive panels can create inspection and control errors. A simulation model was developed to investigate the cost effects of inspection and control errors and it was found that inspection error had a significant effect in increasing total quality cost, with the magnitude of this increase dependent on the level of control. Further, the simulation found that the lowest cost quality control policy was that which allowed a number of defective panels to accumulate before resetting the press-line. [ABSTRACT FROM AUTHOR]