Back to Search
Start Over
Properties of screen printed electrocardiography smartware electrodes investigated in an electro-chemical cell.
- Source :
- BioMedical Engineering OnLine; 2013, Vol. 12 Issue 1, p1-11, 11p, 2 Diagrams, 2 Charts, 4 Graphs
- Publication Year :
- 2013
-
Abstract
- Background: ECG (Electrocardiogram) measurements in home health care demands new sensor solutions. In this study, six different configurations of screen printed conductive ink electrodes have been evaluated with respect to electrode potential variations and electrode impedance. Methods: The electrode surfaces consisted of a Ag/AgCl-based ink with a conduction line of carbon or Ag-based ink underneath. On top, a lacquer layer was used to define the electrode area and to cover the conduction lines. Measurements were performed under well-defined electro-chemical conditions in a physiologic saline solution. Results: The results showed that all printed electrodes were stable and have a very small potential drift (less than 3 mV/30 min). The contribution to the total impedance was 2% of the set maximal allowed impedance (maximally 1 kΩ at 50 Hz), assuming common values of input impedance and common mode rejection ratio of a regular amplifier. Conclusion: Our conclusions are that the tested electrodes show satisfying properties to be used as elements in a skin electrode design that could be suitable for further investigations by applying the electrodes on the skin. [ABSTRACT FROM AUTHOR]
Details
- Language :
- English
- ISSN :
- 1475925X
- Volume :
- 12
- Issue :
- 1
- Database :
- Complementary Index
- Journal :
- BioMedical Engineering OnLine
- Publication Type :
- Academic Journal
- Accession number :
- 89708845
- Full Text :
- https://doi.org/10.1186/1475-925X-12-64