Capping green emitting (Ga,In)N quantum wells with (Al,Ga)N: impact on structural and optical properties.

The difference of growth temperatures between InGaN quantum wells and GaN barriers has detrimental effects on the properties of the wells. Different capping processes of InGaN quantum well with a thin AlGaN layer have been investigated to prevent these effects. Both structural and optical properties of the samples, grown on c-plane sapphire substrates by metalorganic vapor phase epitaxy, were studied through transmission electron microscopy (TEM), x-ray diffraction and room temperature photoluminescence. The average quantum well thickness and its indium composition were determined by digital processing of lattice fringes in cross-sectional TEM images. From the analysis of the well thickness distribution, it is shown that AlGaN as a capping layer helps to compensate an unwanted undulation at the upper InGaN QW-barrier interface. Moreover, when deposited at the same temperature as InGaN, the AlGaN layer is effective in avoiding or reducing the evaporation and/or diffusion of indium from InGaN wells, which results in the thinning of the well. It therefore helps to extend the emission wavelength up to 540 nm with a reduced degradation of the room temperature photoluminescence efficiency. [ABSTRACT FROM AUTHOR]